Heat Pump's Tripping Breaker; Heat Pump Won't Shut Off - Aquacal GBB Series Operation Manual

Heat Pump's Tripping Breaker

ISSUE
The heat pump breaker(s) keeps tripping.
RESOLUTION
®
1. If AquaCal
heat pumps have been connected to each other using a multiple heat pump configuration, the
configuration may be incorrect. Please confirm settings or contact installer of equipment.
2. Have an electrician confirm breakers are correct type, in good condition, and properly sized for the heat
pump.

Heat Pump Won't Shut Off

ISSUE
The heat pump will not deactivate.
RESOLUTION
PLEASE NOTE
When heat pump is set to off, the display will show the current water temperature or no
water flow indicator.
1. Confirm the correct mode has been set on the heat pump.
See "Activate Heat Mode, Cool Mode, Auto Mode, or Deactivate Equipment" on page 6.
l
2. Confirm the heat pump has reached the desired temperature set on the thermostat. The heat pump will
continue to run until the set temperature is reached.
See "Set Temperature" on page 7.
l
3. If the heat pump is using an external controller, it may not be set correctly. See external controller's manual.
Page - 39