Clearances - Aquacal GBB Series Operation Manual

Polishing
1. Polish the heat pump's cabinet panels using an approved polishing agent and following the manufacturer's
instructions. Do not use chemicals on the display panel.
2. Rinse the heat pump panels with fresh water, wipe, and buff panels using a dry soft cloth.
3. Allow heat pump interior and surrounding equipment to "air-dry" for several hours prior to restoring electrical
power.
APPROVED POLISHING AGENTS
Simoniz ® Wax
Glo-Coat ®
Armor All ® Protectant
Table 2 - Polishing Agents
•
The trademarks used in approved polishing agents are property of their owners and are not related to
AquaCal ® .

2.3 Clearances

Proper air circulation is required for the heat pump to operate efficiently. The following diagrams show the
l
minimum clearances required for the proper operation of the heat pump.
Avoid storing chemical containers near the heat pump. The chemicals can cause equipment damage.
l
Avoid placing objects near or on top of the heat pump. This includes shrubbery and lawn furniture. These objects
l
will reduce performance and efficiency and hinder maintenance access.
Great Big Bopper
Page - 27
®
(Side View)
•
®
Great Big Bopper (Top View)