Set Temperature; Set Up Programming; Factory Defaults - Aquacal GBB Series Operation Manual

1.4 Set Temperature

Select the pool or spa thermostat. Then press the up or down arrow to set a desired temperature (set point) for
the water.
The heating indicator will illuminate when heating the water.
l
The cooling indicator will illuminate when cooling the water.
l

1.5 Set Up Programming

1.5.a Factory Defaults
Certain options have been preset at the factory. These options can be overwritten for site-specific conditions.
NOTICE
Unauthorized adjustments in the Installer or Service Menus may void heat pump's warranty.
l
MENUS
SET GAS BOOST
SET TIME / DATE
SET TIME FORMAT
SET DATE FORMAT
Page - 7
Failure to heed the following may result in damage to equipment.

FACTORY DEFAULTS

DEFAULT
OFF
USER TO SET
12 Hour
MDY
OPTIONS
OFF
ON
12 Hour
24 Hour
MDY
DMY