Installing The Mac Dedicated Software; Working With Gatekeeper - Tascam 12 Owner's Manual

12 - USB audio interface functions

Installing the Mac dedicated software

NOTE
i Install the Mac dedicated software on the computer
beforeconnecting the unit to it with the USB cable.
i Depending on the Gatekeeper setting, a warning message
might appear during installation. Please see "Working with
Gatekeeper" on page 54 for information about Gatekeeper.
Mac dedicated software installation procedures
1.
Download the latest Mac dedicated software for the
operating system you are using from the TEAC Global Site
(http://teac-global.com/) and save it on the computer to be
used with the unit.
2.
Double-click "TASCAM_MODEL MIXER_Installer_x.xx.dmg",
which is the saved disk image file for the Mac dedicated
software, and double-click "ModelMixer_Installer.pkg"
inside the folder that opens.
NOTE
Depending on the computer's settings, the downloaded zip
file might not have been uncompressed automatically. In this
case, uncompress the zip file first and then double-click the
disk image file.
3.
When the installer starts, click the "Continue" button.
4.
Next, select the desired language and click the "Continue"
button.
5.
Click the "Read License" button and check the contents
of the Software License Agreement. If you agree to the
contents of the license, click "Agree".
Then, click the "Next" button.
54
TASCAM Model 12
6.
Next, click the "Install" button to start installation.
7.
The following screen appears when installation has
completed.
Click the "Close" button.

Working with Gatekeeper

When using macOS, depending on the Gatekeeper security
function setting, a warning message might appear during
installation.
The solution depends on the warning message shown.
See the following explanations for details.
When the Gatekeeper setting is "Allow
applications downloaded from: the Mac App
Store"
The following security warning might be shown:
"'ModelMixer_Installer.pkg' can't be opened because it was
not downloadedfrom the Mac App Store. "
In this case, click the "OK" button to close the message. Then,
control-click (or right-click) the file and click "Open" in the
menu.
When the "'ModelMixer_Installer.pkg' can't be opened
because it was not downloaded from the Mac App Store. Are
you sure you want to open it?" security warning message
appears, click the "Open" button.
This warning message might also appear when the
Gatekeeper setting is something other than "Allow
applications downloaded from: the Mac App Store. "