Tascam 12 Owner's Manual Addendum

New functions in firmware V1.40
The following new functions have been added in firmware V1.40.
o Normalization function
o Gain boost function
o USB return channel function
Normalization function
By using the normalization function, the maximum levels of tracks recorded by the MTR can be readjusted within a range of 0 to −20 dB.
Adjusting level differences between tracks makes mixing down easier. Imported tracks and MAIN MIX L/R bus recording files can also be
normalized.
Using the normalization function
1.
When the recorder is stopped, select MTR on the MENU
Screen, and open the MTR Screen.
For setting procedures, see "Das Menü nutzen (Beispiel)"
in "2 - Die Bedienelemente und ihre Funktionen" of the
Owner's Manual.
2.
Select TRACK EDIT on the MTR Screen, and open the TRACK
EDIT Screen.
3.
On the TRACK EDIT Screen, select NORMALIZE and open the
NORMALIZE Screen.
4.
Turn the MULTI JOG dial to select a track to normalize.
Options: 1 (Voreinstellung), 2, 3, 4, 5, 6, 7/8, 9/10, MAIN
0823.MA-3771A
Owner's Manual Addendum
Model 12
5.
Turn the MULTI JOG dial to select the normalization level.
Options: 0 – −20 dB (Voreinstellung: 0 dB)
Press the F4
6.
button to normalize the specified track.
i During conversion, press the F1
cancel processing. Normalization will not be conducted
if canceled.
7.
A "Process done" message will appear after it completes.
8.
Turning the MULTI JOG dial to change the track or level will
restore the screen to its state in step 4.
To continue normalizing other tracks, repeat the procedures
from step 4.
button to