Dell EqualLogic FS7500 Installation And Setup page 50

EqualLogic FS7500 Installation and Setup
Secure the bundled cords to the brackets as follows:
1. Use the hook-and-loop fastener to secure the bundled signal cables to the bracket on the rail on your left as
you face the back of the controller.
2. Use a hook-and-loop fastener to secure the bundled power cables to the bracket on the rail on your right as
you face the back of the controller.
Figure 38 shows the signal and power cable bundles. The rails are hidden in this illustration for clarity.
Figure 39 shows the back panel of the FS7500 controller with the bundled cords secured to the rails.
44
Figure 37: Cable Management Brackets
Figure 38: Bundled Signal and Power Cables
4 Network Cable Connections