Dell EqualLogic FS7500 Installation And Setup page 26

EqualLogic FS7500 Installation and Setup
4. Rotate the battery 180 degrees so the blind mate connector faces toward the back of the power module
chassis. See Figure
5. Keeping the battery pack level and making sure the arrow on the yellow label is pointing up, reinsert the
battery in the module. See
Make sure the battery is completely installed in the module. If the battery protrudes from the module, the
cover will not install correctly.
Warning: For safety, always attach the power module front cover as soon as the battery pack is inserted and
connected.
20
Figure 16: Removing the Battery
17.
Figure 17: Rotating the Battery
Figure 18.
2 Hardware Rack Mounting