Fs7500 Controller Front And Back Panels - Dell EqualLogic FS7500 Installation And Setup

EqualLogic FS7500 Installation and Setup
You must supply the network cables for each FS7500 Controller. Each controller needs 13 network
Note:
cables, depending on network configuration. See

FS7500 Controller Front and Back Panels

Figure 3 and Figure 5 show the front panel and the back panel of the FS7500 Controller.
The external video and USB connectors on the front panel are used when updating the FS7500 software. You
can use these ports to connect an external monitor and keyboard to the controller. For more information about
software updates, see the EqualLogic FS7500 Release Notes.
8
Figure 3: FS7500 Controller Front Panel
Figure 4: FS7500 Controller Front Panel Components
Number Component
1 Power button
2 USB ports
3 Video port
Service tag pull-out card
4
5 LCD screen control keys
6 LCD screen
7 One of six hot-swappable drives
8 Retaining screws (under latch)
Required Hardware That Is Not Supplied on page
1 Before You Begin
10.