Fs7500 Controller Technical Specifications; Fs7500 Backup Power Supply Technical Specifications - Dell EqualLogic FS7500 Installation And Setup

EqualLogic FS7500 Installation and Setup

FS7500 Controller Technical Specifications

Attribute
Weight of controller
Operating temperature
Storage temperature
Operating altitude
Operational relative humidity
Thermal output (fully-loaded controller)
Operational shock
Operational vibration
Input voltage
Input frequency
System input power
Each power supply
Dimensions

FS7500 Backup Power Supply Technical Specifications

Table 3: FS7500 Backup Power Supply Technical Specifications
Attribute
Weight of fully-loaded BPS
Operating temperature
Storage temperature
Operating altitude
Operational relative humidity
Input voltage
Input frequency
Power levels
Dimensions
6
Table 2: FS7500 Controller Technical Specifications
Value
39 pounds or 17.69 kilograms
50 to 95 degrees F (10 to 35 degrees C)
-40 to 149 degrees F (-40 to 65 degrees C)
-50 to 10,000 feet (-16 to 3048 meters)
20 to 80 percent non-condensing
2446.5 BTU/hr maximum (High Output)
1712.9 BTU/hr maximum (Energy Smart)
Half sine shock in all operational orientations of 31G plus or
minus 5% with a pulse duration of 2.6 ms plus or minus 10%
0.26 Gms from 5-350 Hz for 5 minutes in operational
orientations
90 to 264 VAC (auto-sensing)
47 - 63 Hz
90-264 VAC, autoranging, 47-63 Hz
502 W
Input current: up to 55 A per power supply for 10 ms or less
1.68 in. height x 18.99 in. width x 30.39 in. depth
(4.26 cm height x 48.24 cm width x 77.2 cm depth)
Value
66.1 pounds (30 kilograms)
32 to 104 degrees F (0 to 40 degrees C)
5 to 113 degrees F (-15 to 45 degrees C)
10,000 feet (3048 meters)
0 to 95 percent non-condensing
120 V models: 90-140 V, auto-sensing
230 V models: 180-264 V, auto-sensing
50 - 60 Hz (auto-sensing), +/- 3 Hz
500 W DC output
17.1 in. x 1.6 in. x 28.5 in. (434 cm x 42 cm x 723 cm)
1 Before You Begin