Olympus E-M1 Mark III Instruction Manual page 79

♥S
Silent s
(sample
icon)
Pro Capture
p
High
Pro Capture
q
Low
h
High Res Shot
• To cancel the activated self-timer, press G.
• Fix the camera securely on a tripod for self-timer shooting.
• If you stand in front of the camera to press the shutter button when using the self-timer,
the picture may be out of focus.
• In S and q modes, the camera displays the view through the lens during shooting. In
T and p modes, it displays the shot immediately preceding the current frame.
• The speed of sequential shooting varies depending on the lens you are using and the
focus of the zoom lens.
• During sequential shooting, if the battery level icon blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
• Some drive modes are not displayed by default. Use [j/Y Settings] (P. 187) in
G Custom Menu P to choose the modes displayed.
• Photographs taken in silent and pro-capture modes may be distorted if the subject or
camera moves quickly during shooting.
• To use the fl ash in [Silent s] mode (P. 81), select [Allow] for [Anti-Shock r/Silent s]
(P. 157) > [Silent s Mode Settings] > [Flash Mode] in X Shooting Menu 2.
• The frame advance rate may slow when [On1] or [On2] is selected for [Live View Boost].
Select [Off] to maintain a consistent frame rate. g G Custom Menu Q > [Live View
Boost] (P. 188)
Take pictures with the electronic shutter. Use for shutter
speeds faster than 1/8000 s or in settings where the sound of
the shutter would be unwelcome (P. 81). Available in single-
frame, sequential low, sequential high, and self-timer modes.
Frame advance rates of up to 60 fps are available when
sequential high is selected. In ♥T mode, focus, exposure,
and white balance are locked at the values for the fi rst shot
in each series. The fl ash sync speed is 1/50 s. At [K ISO]
settings over ISO 8000, the fl ash sync speed drops to 1/20 s
and the maximum frame advance rate to 30 fps.
Capture starts when the shutter button is pressed halfway. The
camera starts recording pictures, including those captured while
the button was pressed halfway, when the button is pressed
all the way down (P. 81). In p mode, focus, exposure, and
white balance are locked at the values metered when the shutter
button is pressed halfway. At [K ISO] settings over ISO 8000,
the maximum frame advance rate drops to 30 fps.
Take high-resolution photos (P. 83). Use [High Res Shot]
(P. 158) > [Shooting Method] in X Shooting Menu 2 to
choose a shooting method.
2
EN 79