Ending The Connection - Olympus E-M1 Mark III Instruction Manual

Ending the Connection

End the connection to the smartphone. The camera uses Wi-Fi and Bluetooth
connecting to smartphones. The use of these features may be prohibited in some
countries or regions, in which case they should be disabled.
 Ending the Current Connection
1
Use the [Power Off] slider in the OI.Share or
OI.Track settings dialog.
• Alternatively, you can press the camera MENU button
and tap [Disconnect] in the monitor.
MENU button
2
Select [Off] for [Power-off Standby] to disable the "auto upload while off"
feature.
• MENU button
Standby] [Off]
 Disabling Wi-Fi/Bluetooth
Press the MENU button to display the menus.
1
Highlight [Wi-Fi/Bluetooth Settings] in the e setup
2
menu and press I on the arrow pad.
Highlight [Availability] using the FG buttons and
3
press the I button.
Highlight [Off] using the FG buttons and press the
4
Q button.
Device Connection
w w 1 1
100
%
Connect to a device.
Disconnect
Disconnect
e setup menu
[Wi-Fi/Bluetooth Settings]
®
®
when
E-M1MarkIII
[Power-off
Setup Menu
100
%
Card Setup
1
X Settings
2
W English
s j±0 k±0
Rec View
Wi-Fi/Bluetooth Settings
Firmware
Back
Wi-Fi/Bluetooth Settings
100
%
Availability
Connection Password
Power-off Standby Off
RAW+JPEG h JPEG
Reset Settings
Wi-Fi MAC Address
Back
Availability
100
%
Off
Wi-Fi/Bluetooth is completely
deactivated and a connection
cannot be initiated.
Back
5
Off
Set
On
Set
Set
EN 255