Network Settings; Changing Passwords (Connection Password) - Olympus E-M1 Mark III Instruction Manual

Network Settings

Change the password used for Wi-Fi connections from a smartphone or restore default
Wi-Fi settings used for connection to a computer. The latter are not restored when a
camera reset is performed and can only be restored as described below.
Changing Passwords
Generate new passwords for use when connecting to the camera from a smartphone
via Wi-Fi or Bluetooth
Press the MENU button to display the menus.
1
Highlight [Wi-Fi/Bluetooth Settings] in the e setup
2
menu and press I on the arrow pad.
5
• [Wi-Fi/Bluetooth Settings] options will be displayed.
Highlight [Connection Password] using the FG
3
buttons and press the I button.
• The current password will be displayed.
Press the R (movie) button.
4
• The password changes each time the button is pressed.
• Both the Wi-Fi and Bluetooth
• Press the Q button to exit the [Connection Password] display.
Press the Q button again to exit the [Wi-Fi/Bluetooth Settings] menu.
5
• Press the MENU button repeatedly to exit the menus.
• After changing the password, you will need to update smartphone connection settings
(P. 246).
272 EN
®
.
®
passwords change.
(Connection Password)
Setup Menu
100
%
Card Setup
1
X Settings
2
W
s
Rec View
Wi-Fi/Bluetooth Settings
Firmware
Back
Wi-Fi/Bluetooth Settings
100
%
Availability
Connection Password
Power-off Standby
RAW+JPEG h
Reset Settings
Wi-Fi MAC Address
Back
English
j±0 k±0
Off
Set
On
Off
JPEG
Set