Choosing An Exposure Mode (N Mode (Movie Exposure Modes)) - Olympus E-M1 Mark III Instruction Manual

Choosing an Exposure Mode
You can create movies that take advantage of the effects available in P, A, S, and M
modes. This option takes effect when the mode dial is rotated to n.
Select [n Mode Settings] in n Video Menu and press the Q button.
1
Select [n Mode] (movie exposure modes) and press I.
2
Use FG to select an option and press the Q button.
3
Optimal aperture is set automatically according to the brightness of the subject.
P
Use the front dial or rear dial to adjust exposure compensation.
Depiction of background is changed by setting the aperture.
A
Use the front dial to adjust exposure compensation and rear dial to adjust aperture.
Shutter speed affects how the subject appears. Use the front dial to adjust exposure
S compensation and rear dial to adjust shutter speed.
Shutter speed can be set to values between 1/24 s and 1/32000 s.
Freely adjust both aperture and shutter speed.
Use the front dial to select aperture value and the rear dial to select shutter speed.
• Choose from shutter speeds of 1/24–1/32000 s. Values of ISO 200–6400 are
available using the [n ISO] manual sensitivity control options.
M • The display shows the difference between the exposure produced by the selected
aperture and shutter speed and the optimal exposure metered by the camera. The
display will fl ash if the difference exceeds ±3 EV.
• The option chosen for [n Specifi cation Settings] > [b ISO-Auto Set] (P. 161)
takes effect.
• Blurred frames caused by such factors as the subject moving while the shutter is open
can be reduced by selecting the fastest available shutter speed.
• The low end of the shutter speed changes according to the frame rate of the movie record
mode.
• Excessive camera shake may not be compensated enough.
• When the inside of the camera becomes hot, shooting is automatically stopped to protect
the camera.
(n Mode (Movie Exposure Modes))
4
EN 165