Olympus E-M1 Mark III Instruction Manual page 223

 Reducing Flicker in Photographs (Anti-Flicker Shooting)
You may notice uneven exposure in photos taken under fl ickering light. When this
option is enabled, the camera will detect the fl icker frequency and adjust the timing
of the shutter release accordingly. This feature applies to photos taken with the
mechanical shutter.
Highlight [Flicker Reduction] in G Custom Menu N
1
and press the Q button.
Highlight [Anti-Flicker Shooting] using the FG
2
buttons and press the I button.
• [Anti-Flicker Shooting] options will be displayed.
Highlight [On] or [Off] using the FG buttons and
3
press the Q button.
• [Flicker Reduction] options will be displayed.
Press the MENU button repeatedly to exit the menus.
4
• A u icon appears in the display when [On] is selected.
• This option does not take effect in modes that use the electronic shutter, including silent
modes, High Res Shot, and Pro Capture modes.
• The camera may be unable to detect fl icker at some settings. Normal release timing will
be used if fl icker is not detected.
• Normal release timing is used at slow shutter speeds.
• Enabling fl icker reduction may cause release lag, slowing the frame advance rate during
burst photography.
C1. Release/ j /Image Stabilizer
100
%
S-AF Release Priority
A1
1
A2 C-AF Release Priority
2
A3
j L Settings
A4
j H Settings
B1
Flicker Reduction
B2
C1 C1
C2
Back
Flicker Reduction
100
%
Anti-Flicker LV Auto
Anti-Flicker Shooting Off
Back
Anti-Flicker Shooting
100
%
On
Effects of flicker such as uneven
exposures and colors will be
reduced.The shutter release time
lag may become longer.
Valid when using mechanical shutter.
Back
u icon
FLK
100
%
ISO-A
200
P
250 F5.6 0.0
Off
On
Set
4
Set
Set
S-IS AUTO S-IS AUTO
YF YF
4K
30 p 30 p
1:02:03
1023
EN 223