Equalizer
This car audio system is equipped with
a parametric 2-band equalizer. For
"LOW EQ" the gain can be set to a fre-
quency between 60 to 100 Hz. For
"HIGH EQ" the gain can be set to a fre-
quency between 10000 and 17500 Hz.
As a result, it is possible to significantly
influence the in-vehicle acoustics.
Notes on making equalizer
settings
We recommend that you use a cassette
or CD (if a CD changer is connected)
you are familiar with to make the set-
tings.
Before you set the equaliser, set bass,
treble, balance and fader to "0" and de-
activate the Loudness function. For
more information on how to do this, re-
fer to the section on "Tone and balance/
fader".
Now listen to the cassette or CD
you have selected.
Evaluate the sound according to
your own personal preferences.
Now refer to "Sound impression" in
the following table.
Make the settings for the equalizer
as described under "What to do".
Switching the equalizer on/off
To switch the equalizer on, press
and hold down EQ < until EQ
lights up in the display and "EQ
ON" appears briefly.
To switch the equalizer off, press
and hold down EQ < until EQ no
longer lights up in the display and
"EQ OFF" appears briefly.
Adjusting the equalizer
Press EQ <.
"LOW EQ" will appear in the display.
: to select either
Press
or
"LOW EQ" or "HIGH EQ".
Press
or
gain.
: to select the fre-
Press
or
quency range.
To select the next frequency, press
OK ; first and then
Once you have completed making
all of the necessary adjustments,
press EQ <.
EQUALIZER
: to adjust the
:.
45