Table of Contents
Advertisement
Scanning all of the cassette
tracks (SCAN)
Press OK ; for longer than two
seconds.
"CAS SCAN" will appear in the display.
Scanning will begin with the next track
in ascending order.
To stop the SCAN function, press
OK ; again.
The track currently scanned will contin-
ue playing.
Notes:
It is possible to adjust the scan
time. For more information, read
the section on "Adjusting the scan
time" in the chapter on "Radio Op-
eration".
To be able to use the S-CPS, RPT
and SCAN functions, there has to
be a blank space of at least three
seconds between the tracks on the
cassette.
Switching the display mode
To switch the display between the
tape side and the clock, press
DIS 7 for longer than two sec-
onds once or repeatedly as re-
quired, until the desired information
appears in the display.
TAPE DECK OPERATION
Fast forward/rewind
Fast forward
:.
Press
"FORWARD" will appear in the display.
Fast rewind
:.
Press
"REWIND" will appear in the display.
Stopping fast forward/rewind
Press OK ;.
Playback will resume normally.
Note:
During fast forward/rewind, it is also
possible to listen to the last radio sta-
tion you tuned into. Switch on "Radio
monitor".
Interrupting playback (Pause)
To interrupt cassette playback,
press 3
Playback will be interrupted, "CAS
PAUSE" will appear in the display.
Press 3
pause.
/
Switching Radio monitor on/off
Press MENU 8.
Press
ON" or "RM OFF" appears in the
display.
Press
or
monitor on or off.
Press MENU 8 or OK ;.
>.
> again to end the
: repeatedly until "RM
: to switch Radio
39
Hide quick links:
Advertisement
Table of Contents
