Selecting Wavebands/Memory Banks; Tuning Into Radio Stations; Adjusting Seek Tuning Sensitivity - Blaupunkt Bologna C50 Operating Instructions Manual

Blaupunkt radio/cassette operating instructions
Hide thumbs Also See for Bologna C50:
Table of Contents

Advertisement

Note:
It is necessary to activate/deactivate
REG in the menu.
Switching REG on/off
Press MENU 8.
: repeatedly until "REG"
Press
appears in the display. "OFF" or
"ON" will appear next to "REG".
: to switch REG off
Press
or
or on.
Press MENU 8 or OK ;.
Switching RDS functions on/off
To take advantage of the RDS
functions for AF and REG, press
RDS 4.
When the RDS functions have been
activated, "RDS" will light up as a sym-
bol in the display. When you activate
RDS functions, "REG ON" or "REG
OFF" will appear briefly in the display.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM, MW
and LW (AM) wavebands (MW and LW
do not apply to the Düsseldorf C50 and
the Colorado DJ50). There are three
memory banks for the FM waveband
and one memory bank each for MW and
LW.
You can store six stations in each of
these memory banks.
To switch between the different FM
memory banks or wavebands,
press BND / TS 5.
RADIO OPERATION

Tuning into radio stations

You can tune into radio stations in a
number of different ways.
Automatic seek tuning
Press
or
The radio will tune into the next availa-
ble station within reception range.
Manual station selection
You can also tune into radio stations
manually.
:.
Press
or
Note:
You cannot use manual tuning unless
the RDS functions are deactivated.
Paging through the broadcasting
network (for FM only)
If a radio broadcasting network has
more than one station, you can page
through the "station network".
: to tune into the
Press
or
next station in the network.
Note:
To take advantage of this function, you
must have activated the RDS functions.
It is only possible to tune into those sta-
tions which have been received once
before already. To do this, use the SCAN
or TravelStore function.

Adjusting seek tuning sensitivity

It is possible to adjust the sensitivity of
the seek tuning function to tune the ra-
dio into stations with strong reception
signals only, or to those with weaker
reception signals as well.
:.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorado dj50Düsseldorf c50Carolina dj50

Table of Contents