Basic Functions; Plug And Play - Philips FWC270/19 User Manual

Basic Functions

DIGITAL SOUND DISPLAY
STANDBY-ON
SLEEP
IMPORTANT!
Before you operate the system, complete
the preparation procedures.

Plug and Play

Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "AUTO
INSTALL - PRESS PLAY" is displayed.
2
PressÉ Å on the system to start installation.
➜ "INSTALL" is displayed, followed by "TUNER"
and "AUTO".
➜
starts flashing.
PROG
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
In standby or demonstration mode, press and
holdÉ Å on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
2
PressÉ Å again to start installation.
➜ All previously stored radio stations will be
replaced.
12
BAND TAPE 1 • 2
TAPE
TUNER
SEARCH •TUNING PLAY• PAUSE SEARCH •TUNING
L
PREV/ PRESET STOP•CLEAR / DEMO STOP NEXT/
CLOCK/
DIM MODE
PROGRAM
TIMER
(for tuner installlation)
MASTER
VIDEO
VOLUME
AUX
PRESETL
To exit without storing the Plug and Play
G Press Çon the system.
➜ If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
2
CD 1/2/3 TUNER TAPE 1/2 AUX/CDR
REPEAT SHUFFLE SLEEP
VOL
í ë
É Å
Ç
á á
DSC DBB MUTE
MUTE NEWS/TA