Playing Tapes; Rewinding/Fast Forwarding; General Information On Recording - Philips FWC270/19 User Manual

Playing tapes

To playback a selected tape deck
G PressÉ on tape deck 1 or 2.
➜ The tape will stop at the end of playback.
Continuous playback of two tapes
1
Load the tapes in tape deck 1 and 2.
2
PressÉ on tape deck 2.
3
Press Å on tape deck 1, followed byÉ .
➜ Playback will begin from tape deck 2 and
continue with tape deck 1. It will stop at the end
of tape deck 1.
To interrupt playback
G Press Å .
G To resume playback, press Å again.
To stop playback
G Press 70.
Rewinding / Fast forwarding
1
Stop playback, press à or á.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
Press 70 to stop rewinding or fast forwarding.
2
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
Tape Operation/Recording
General information on
recording
G If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
G For recording, use only tape of IEC type I
(normal tape).
G The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
G The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
G To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 1.
21