Table of Contents
Advertisement
TITLE
CN70 Service Work Instructions
7. Place the core assembly with the touch panel face down on a flat surface. Apply light pressure to hold the
magnesium frame snug against the display assembly and, using a #1 Phillips screwdriver, install 2 screws to secure
the touch panel to the magnesium frame with 1.5+/-0.2 in-lbs of torque.
Install screw
(one each side)
8. Re-install the core assembly into the top housing.
9. Re-install the bottom housing assembly.
5
Model
DOCUMENT NO.
CN70A,CN70E
SWICN70-000
PAGE
Page 29 of 45
Advertisement
Table of Contents
