Table of Contents
Advertisement
TITLE
CN70 Service Work Instructions
5. Connect the LCD flex cable to the main logic board and then position the LCD panel down into the boot.
6. Flip the touch panel over and lower it over the LCD panel aligning its mounting holes with the screw holes in the
magnesium frame.
Continued on next page...
Align holes in touch
panel bracket with screw
holes in frame (one each
side)
Connect LCD
flex cable
Model
DOCUMENT NO.
CN70A,CN70E
SWICN70-000
Place LCD panel
into boot
PAGE
Page 28 of 45
Advertisement
Table of Contents
