Advertisement
connectinG to tHe poWer sUppLY (Fig. 6)
WArninG! For your safety, it is required that the plug attached to the trimmer is always
connected to an extension cord. the extension cord must be suitable for outdoor use with
sockets protected against water splashing. the extension cord must always be used with the
cable strain relief. do not use the trimmer without an extension cord connected. Always use a
residual current supply (rcd) protected supply.
1. Make sure the trigger switch (2) is in its off position.
2. Double the extension cord, about a foot from the end. Lead the loop through the hole on the handle and
hook the loop over the cable strain relief (1). Gently pull on the cord to ensure that it is firmly attached at the
handle.
Fig. 6
1
3. Connect the extension cord to a suitable socket.
WArninG! check the voltage and current! the voltage and current must comply with the
information on the rating label!
prepArAtion
2
8
Advertisement
