Related Manuals for Ryobi RLT30CETG
Summary of Contents for Ryobi RLT30CETG
- Page 1 RLT30CETG 30cc CURVED TRIMMER ELECTRIC START OPERATOR’S MANUAL Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating this machine. Subject to technical modifications.
-
Page 2: General Safety Rules
Raynaud’s Syndrome in certain MODEL BATTERY PACK CHARGER individuals. Symptoms may include tingling, numbness and RLT30CETG 130504003 720323001 blanching of the fingers, usually apparent upon exposure to ■ Wear heavy, long trousers, boots, and gloves. Do not wear cold. -
Page 3: Specific Safety Rules
ENGLISH (Original Instructions) the unit wear gloves to keep the hands and wrists warm. It ■ For best results, your battery tool should be charged in a is reported that cold weather is a major factor contributing to location where the temperature is more than 10°C but less than Raynaud’s Syndrome. - Page 4 ENGLISH (Original Instructions) SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME EXPLANATION Volts Voltage Amperes...
- Page 5 ENGLISH (Original Instructions) SYMBOLS Keep all bystanders, especially children and pets, at least 15 m from the Keep bystanders away operating area. Ricochet Thrown objects can ricochet and result in personal injury or property damage. No blade Do not install or use any type of blade on a product displaying this symbol. Use unleaded petrol intended for motor vehicle use with an octane rating of Petrol and lubricant 91 [(R + M) / 2] or higher.
-
Page 6: Description Of Figures
’s manual. If you do not Figure 4 understand the warnings and instructions in the 25. Power head shaft operator’s manual, do not use this product. Call Ryobi 30. Bolt customer service for assistance. 31. Bracket 32. Front handle... - Page 7 ENGLISH (Original Instructions) Figure 17 plug wire from the spark plug and remove battery pack when 48. String line assembling parts. 49. Slot INSTALLING THE POWER HEAD SHAFT TO THE 50. Hole ATTACHMENT Figure 18 See Figure 2. 51. Idle speed screw WARNING: Figure 19 Never install, remove, or adjust any attachment while...
- Page 8 2.7mm line must be used. ■ Reinstall the line spool. For the RLT30CETG curved line trimmer ■ Stop the engine and disconnect the spark plug wire. attachment, the spool should be placed so the text on the spool is showing “This side out for curved shaft”.
-
Page 9: Operation
ENGLISH (Original Instructions) FEATURES product, familiarise yourself with all operating features and safety instructions. PRODUCT SPECIFICATIONS CHARGER Engine Displacement 30 cm³ The charger has a key-hole hanging feature for convenient, space- Cutting Path Diameter 17 in / 432 mm saving storage. Screws should be installed so that the centre String Diameter 2.4 &... -
Page 10: Oxygenated Fuels
ENGLISH (Original Instructions) Keep petrol and lubricant away from the eyes. If petrol or lubricant CHARGING THE BATTERY PACK comes in contact with the eyes, wash them immediately with clean The battery pack for this tool has been shipped in a low charge water. -
Page 11: Cutting Tips
ENGLISH (Original Instructions) LINE TRIMMING CUT-OFF BLADE of a tool. When using any tool for prolonged periods, ensure you take regular breaks. See Figure 12. Hold the trimmer with your right hand on the rear handle and your The trimmer is equipped with a line trimming cut-off blade on the left hand on the front handle. -
Page 12: Maintenance
ENGLISH (Original Instructions) IDLE SPEED ADJUSTMENT 10. Wait 6-10 seconds, then squeeze the throttle trigger to run. NOTE: Squeezing and releasing the throttle trigger releases the See Figure 18. choke lever to the RUN position. If the cutting attachment turns at idle, the idle speed screw needs To start a warm engine: adjusting on the engine. -
Page 13: Troubleshooting
ENGLISH (Original Instructions) TROUBLESHOOTING IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORISED SERVICE DEALER. PROBLEM POSSIBLE CAUSE SOLUTION The spark plug may be damaged, remove it and check for No spark. dirt and cracks. Replace with a new spark plug. Push primer bulb until bulb is full of fuel. - Page 14 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand 960739002-03...
Need help?
Do you have a question about the RLT30CETG and is the answer not in the manual?
Questions and answers