Related Manuals for Ryobi RLT36SB
Summary of Contents for Ryobi RLT36SB
- Page 1 RLT36S/RLT36SB 36 V STRAIGHT SHAFT LINE TRIMMER ORIGINAL INSTRUCTIONS Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating this machine.
-
Page 2: General Safety Rules
■ Stop using the machine while people, especially Thank you for buying a Ryobi product. children, or pets are nearby. SAVE THIS MANUAL FOR FUTURE REFERENCE ■ Only use the machine in daylight or good artificial light. -
Page 3: Maintenance
English (Original Instructions) power tool while you are tired or under the influence of maintained power tools. drugs, alcohol or medication. A moment of inattention ■ Do not let debris build up on your product. Clean while operating power tools may result in serious often to maintain proper ventilation. - Page 4 English (Original Instructions) SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool effectively and safely. SYMBOL DESIGNATION/EXPLANATION Precautions that involve your safety. Read the operation manual and follow all warnings and safety instructions.
-
Page 5: Specifications
English (Original Instructions) SPECIFICATIONS ASSEMBLY UNPACKING Model RLT36S, RLT36SB This product requires assembly. Voltage 36 Volts ■ Carefully remove the product and any accessories from the box. Make sure that all items listed in the Cutting head Automatic feed packing list are included. -
Page 6: Operation
REMOVING THE ATTACHMENT FROM THE POWER HEAD This product will accept Ryobi 36 V lithium-ion battery packs only. ■ Remove the battery pack. For complete charging instructions, refer to the Operator’s ■... - Page 7 English (Original Instructions) ■ Set the trimmer on a flat surface and turn the knob WARNING counterclockwise to loosen the handle. Always remove battery pack from your tool when you ■ For trimming, adjust the handle upward. are assembling parts, making adjustments, cleaning, or ■...
-
Page 8: General Maintenance
English (Original Instructions) ADVANCING THE CUTTING LINE WARNING NOTE: The trimmer is equipped with an auto-feed head. Always hold the string trimmer away from the body Attempting to advance the line by bumping the head will keeping clearance between the body and the string damage the trimmer and void the warranty. - Page 9 English (Original Instructions) there should be at least 6.5mm between the wound WARNING cutting line and the outside edge of the spool. Do not at any time let brake fluids, gasoline, petroleum- ■ Replace the spool and the spool cover. Refer to "Spool based products, penetrating oils, etc., come in contact Replacement"...
-
Page 10: Troubleshooting
English (Original Instructions) TROUBLESHOOTING Problem Possible cause Solution String is welded to itself. Lubricate with silicone spray. Install string. Refer "String Not enough string on spool. Replacement" earlier in this manual. String will not advance when using the auto-feed head. Pull string while the pressing line release String is worn too short. - Page 12 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 27 Clemow Drive Mt. Wellington, Auckland 1060, New Zealand...