Response Settings - Raymarine ST60 Owner's Handbook Manual

36

Response settings

The response values for both SPEED and VMG determine the frequency
at which information is updated. A low number provides a smooth
response and a high number a much livelier update.
Use the timer
required value. Response values are from 1 to 15.
Boat show mode
CAUTION:
Do NOT enable this mode. It must only be used for demonstration
purposes.
Ensure that the Boatshow Mode Use is set to OFF. If necessary, use the
timer or reset timer timer timer timer
Factory defaults
You can use this screen to reset the operating parameters to the factory
default values. If you want to apply the factory defaults, ensure the
display shows YES, but if you want to retain the current values, ensure
that the display shows NO
required selection.
The values you have selected will be applied when you exit this screen.
Leaving Dealer calibration
Hold down the speed and trip keys for 2 seconds to save your
settings, exit Dealer calibration and resume normal operation.
timer timer
timer timer (decrement) and reset
reset reset reset key to achieve this. reset
NO NO
NO. Use the timer NO
ST60 Speed Instrument Owner's Manual
reset reset
reset reset (increment) keys to set the
timer timer reset reset
timer timer and reset reset keys to make the reset