Other Functions
Switching on/off
Switching the system ON
In Standby
●
Press STANDBY ON
➜
The system will go back to its previous status.
●
Press DISC, TUNER, TAPE, AUX
➜
The system will switch to the selected source.
Switching the system to STANDBY
mode
In any other source mode
●
Press STANDBY ON (or 2 on the remote
control).
Power saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you
don't press any button within 30 minutes in the
stop mode.
Dimming the display
●
After the preset sleep timer disappears from the
display, press SLEEP/DIM repeatedly to select
different levels of brightness for the display:
HIGH, MID or LOW.
Vocal
This function allows you to fade out the original
vocal from a karaoke. Press AUDIO key to
select different audio modes.
For DVD karaoke discs:
AUDIO 1, AUDIO 2, AUDIO 1 VOCAL,
AUDIO 2 VOCAL.
For VCD karaoke discs:
LEFT VOCAL, RIGHT VOCAL, MONO LEFT,
MONO RIGHT or STEREO.
40
Key control
This feature allows you to change the key tone
when you play a DVD or VCD disc.
●
Press KEY.
➜
"KEY CONTROL ON" will be display on the
TV screen for 5 seconds.
➜
The Key control indicator will flash when you
press VOL +/- to change the key tone level.
➜
If you don't adjust the key control level within
5 seconds, the indicator will turn off.
●
Press KEY again to exit key control mode.
➜
"KEY CONTROL OFF" will be displayed on
the TV screen for 5 seconds.
Echo
This feature allows you to add echo while singing
or talking through a microphone.
●
Press ECHO.
➜
"ECHO CONTROL ON" will be displayed
on the TV screen for 5 seconds.
➜
Press VOL +/- to change the echo level
between 0 and 8.
– Select level 0 to switch off Echo.
●
Press ECHO again to exit Echo control mode.
➜
"ECHO CONTROL OFF" will be displayed
on the TV screen for 5 seconds.
Notes:
– Echo will be disabled automatically when the
microphone is unplugged.
– "PLEASE INSERT MIC" is displayed on your
TV screen if you have not connected the
microphone to the system in ECHO CONTROL ON
mode.