5000D Series Rear Panel - Firecom 5000D Series Installation & Operation Manual

5000D SERIES REAR PANEL

The Rear Panels of the 5000D Series Digital Intercoms are shown below. This section describes the different connectors located on the
rear of the Intercom.
RADIO INTERFACE JACK(S)
A 9-Pin D-Sub connector, which provides the attachment point for the Mobile Radio Interface Cable; the 5100D has 1 jack, the 5200D
has 2 jacks, the 5300D has 3 jacks, and the 5400D has 4 jacks.
POWER CONNECTOR
A 2-Pin connector where the Power Cable Assembly is plugged in to interface the 5000D Series Intercom to the vehicle's power supply.
MODULAR JACKS
The modular jacks are the connection points for the CA Cables leading from the Intercom Unit to the Base Station and Remote Head.
AUXILIARY INPUT/OUTPUT
A 3.5 mm stereo (4-conductor) jack used to bring audio (cell phone, music player, etc.) into the Intercom system, and to bring Intercom
Audio and Radio Receive Audio out of the Intercom system.
REMOTE INTERCOM JACK
This modular jack is the connection point from the CA Cable leading from the Intercom Unit to the Remote Head.
USB
Used for advanced programming.
FIGURE 4
8