Troubleshooting - auna Connect 120 Series Manual

Smart radio
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

Error
The device does not switch
on.
No sound.
No network connection can
be established.
WiFi connection cannot be
established.
No station is found.
Hiss in FM mode
No stations available /
burbling / intermittent in
DAB mode
Remedy
Check it the power adaptor is connected
properly.
1. Turn on the sound as it may be muted
2. Increase the volume.
3. Pull any connected headphone or
speaker from the connector jack.
1. Check the WLAN function.
2. Try to set an IP address at the device.
3. Activate the DHCP function on the router
and make the connection again at the
device.
4. A firewall is activated on the network –
set the respective program in such a way
that access is possible.
5. Reboot the router
1. Check the availability of WLAN network
on the router.
2. Place the device closer to the router.
3. Make sure the password is correct.
1. Check the network as well as the access
point and firewall.
2. The station may not be available
currently, try again later.
3. The link of the station is changed or
the station no longer transmits – ask the
provider for information.
4. The link of manual added station may
not be correct, check and change it.
1. Check/move the FM antenna.
2. Move the radio.
1. Move the radio.
2. Rescan local stations only (high-
strength).
3. Check the local DAB coverage.
EN
41

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents