Wan/Wifi Antenna - Honeywell CK75 Repair Manual

TITLE
CK75 Repair Manual
Install screw
( one each side )
8.
Re-install the core assembly into the top housing.
9.
Re-install the bottom housing assembly.
OPERATION:

WAN/WiFi Antenna

The main WAN radio antenna sits on top of the scan bracket assembly. This structure also contains the 802.11 radio antenna. To
remove this antenna you will need to remove the scan bracket assembly.
Tools Required
Description
T10 Torx driver
T7 Torx driver
Phillips screwdriver with #1 tip
Parts Required
Item Part Number
1
8754-870903-01
2 48-454399-01
Removal
1.
Remove the bottom housing assembly (refer to bottom housing operation).
2.
Remove the scan bracket assembly (refer to Scan Bracket Assembly operation).
3.
Using a #1 Phillips screwdriver remove three screws the secure the WAN antenna to the scan bracket assembly.
5
Description
WLAN 2.4/5G ANTENNA FOR CK75
Screw, DST,#2-28*3/16",PH,FLT,ST,ZN
Model DOCUMENT NO.
CK75
L3-GLBL-RPR-4254
Part Number
PAGE
Page 32 of 42
(Rev A)
Qty
1
3