Honeywell CK75 Repair Manual page 31

TITLE
CK75 Repair Manual
6.
Flip the touch panel over and lower it over the LCD panel aligning its mounting holes with the screw holes in the magnesium
frame.
Continued on next page...
Alig n holes in touch
panel bracket with screw
holes in frame (one each
side)
7.
Place the core assembly with the touch panel face down on a flat surface. Apply light pressure to hold the magnesium frame
snug against the display assembly and, using a #1 Phillips screwdriver, install 2 screws to secure the touch panel to the
magnesium frame with 1.5+/-0.2 in-lbs of torque.
Connect LCD
flex cable
Model DOCUMENT NO.
CK75
L3-GLBL-RPR-4254
Place LCD panel
into boot
PAGE
Page 31 of 42
(Rev A)