Trouble-Shooting; Technical Specifications - Silvercrest SDBK 2400 F5 Operating Instructions Manual

11. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault Possible causes/Action
• Connect the device to the
mains power supply.
No
• Use the temperature control-
function
ler 17 to turn up the temper-
ature.
• Fill the water tank 15 to at
least one quarter full.
Little or • Switch on the steam flow
no steam rate controller 3
(
• Run the self-cleaning cycle.
• Fill the water tank 15 to at
Steam
least one quarter full.
burst is
• Set the right temperature.
not work-
• Leave a pause of a few sec-
ing.
onds between steam bursts.
Spray • Fill the water tank 15 to at
burst is least one quarter full.
not work- • For the first spray burst, you
ing. need to pump several times.
26 GB
).
12. Technical
specifications
Model: SDBK 2400 F5
Mains voltage: 220 - 240 V ~ 50/60 Hz
Protection class: I
Power rating: 2,000 - 2,400 W
Symbols used
Certified Safety. Devices must
comply with the generally ac-
knowledged rules of technology
and the German Product Safety
Act (Produktsicherheitsgesetz -
ProdSG).
With the CE marking,
HOYER Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials: cardboard
(except corrugated cardboard)
Subject to technical modifications.