Disposal; Trouble-Shooting; Technical Specifications - Silvercrest SDBK 2400 D3 Operating Instructions Manual

B&3(B'DPSIEJHOHLVHQB%ERRN 6HLWH  0LWWZRFK  -XOL   

10. Disposal

The symbol showing a
wheelie bin crossed through
indicates that the product re-
quires separate refuse collec-
tion in the European Union.
This applies to the product and all accesso-
ries marked with this symbol. Products iden-
tified with this symbol may not be discarded
with normal household waste, but must be
taken to a collection point for recycling elec-
tric and electronic appliances. Recycling
helps to reduce the consumption of raw ma-
terials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

11. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
~ Do not attempt to repair the device your-
self under any circumstances.
Fault Possible causes/Action
• Connect the device to the
mains power supply.
No
• Use the temperature control-
function
ler 19 to turn up the temper-
ature.
54 GB
Fault Possible causes/Action
• Fill the water tank 16 to at
least one quarter full.
Little or • Switch on the steam flow
no steam rate controller 5
(
• Run the self-cleaning cycle.
• Fill the water tank 16 to at
Steam
least one quarter full.
burst is
• Set the right temperature.
not work-
• Leave a pause of a few sec-
ing.
onds between steam bursts.
Spray • Fill the water tank 16 to at
burst is least one quarter full.
not work- • For the first spray burst, you
ing. need to pump several times.
12. Technical
specifications
Model: SDBK 2400 D3
Mains voltage: 220-240 V ~50/60 Hz
Protection class: I
Power rating: 2,000 - 2,400 W
Subject to technical modification
).