Safety And Environmental Notices; Danger Notices - IBM Network Station E Series Setting Up

Safety and environmental notices

Safety notices contain information that is related to using the IBM Network
Station thin client in a safe manner. The notices can be in the form of a
danger, warning, or caution notice.

Danger notices

The following danger notices call attention to situations that are potentially
lethal or extremely hazardous. These notices pertain throughout this book.
DANGER
To prevent a possible electrical shock during an electrical storm, do not
connect or disconnect cables or station protectors for communications
lines, display stations, printers, or telephones. (RSFTD003)
DANGER
To prevent a possible electrical shock from touching two surfaces with
different electrical grounds, use one hand, when possible, to connect or
disconnect signal cables. (RSFTD004)
DANGER
An electrical outlet that is not correctly wired could place hazardous
voltage on metal parts of the system or the products that attach to the
system. It is the customer's responsibility to ensure that the outlet is
correctly wired and grounded to prevent an electrical shock. (RSFTD201)
DANGER
To prevent a possible electrical shock when installing the system, ensure
that the power cords for all devices are unplugged before installing
signal cables. (RSFTD202)
DANGER
To prevent a possible electrical shock when adding the device to a
system, disconnect all power cords, if possible, from the existing system
before connecting the signal cable to that device. (RSFTD205)
© Copyright IBM Corp. 1999
v