Long Tiller Handle Height/Angle Adjustment - Honda BF75D Manual

Long tiller handle height/angle
adjustment
The long tiller handle height and angle can be adjusted
in three positions by changing the installation direction
of the height adjustment block.
Select a suitable height and angle for the operator and
secure the block.
1) Raise the long tiller handle and remove the 8 x 28
mm flange bolt and the height adjustment block.
2) Pull down the long tiller handle. Determine the
height adjustment block installation direction and
secure the block with the 8 x 28 mm flange bolt.
Install the height adjustment
block so that the selected
angle is in this position.
HEIGHT ADJUSTMENT
BLOCK
HANDLE ANGLE: 7˚
HANDLE ANGLE: 13˚
8 x 28 mm
FLANGE BOLT
HANDLE ANGLE: 21˚
21
Reference point
HANDLE ANGLE: 7˚
HANDLE ANGLE: 13˚
HANDLE ANGLE: 21˚