Area Measurement
Area measurement is a basic function provided in all Leica Disto devices. This helps you
calculate the area of wall or surface just by measuring its sides from the same reference
point.
* Adding and subtracting areas
You can measure two separate areas and add or subtract them from each other with the
help of
or
**The device also calculates
The total linear distance or the circumference.
Volume Measurement
*The device also calculates:
Ceiling/floor area
Wall areas
Total linear distance (circumference)
Triangular Area Measurement
For measuring the area of a surface, press the Function key
On this screen, the area application
the display.
*In D510, you can also find the area application at the bottom left of the device
as you switch it on.
Navigate to the
application. Select the
To begin, press the
your target to take the 1st reading.
Then focusing from the same reference point take the 2
measuring the adjacent wall length.
display)
Once this process is completed the device automatically calculates
the area for you.
keys.
For measuring the volume of an object press the Function key
once.
On this screen, volume application
of the display.
Navigate to the
application. Select the
Measure the three adjacent lengths (l x b x h) using
icon will indicate on display)
*
All measurement needs to be taken from the same reference point.
Once this process is completed the device automatically calculates
the volume on the display.
icon using
=
icon using
key once to switch the laser on and aim at
(as the area icon will indicate on
is located at the bottom right
icon using
=
icon using
key.
is located at the center of
keys to select for Area
key.
nd
keys to select for Volume
.
(as the volume
once.
reading by