Leica DISTO D510 How To Use Manual page 11

 Navigate to the icon using
=
using key.
 Toggle between
Inclination Tracking
Inclination tracking helps you achieve the absolute 0° or 90° apart from finding the actual
inclination of an object such as staircase railings; sloped floors etc. Ideal for horizontal and
vertical adjustments.
 To activate the Inclination Tracking press the Function key
 On this screen, Inclination Tracking icon
 Navigate to the icon using
=
using key.
 The device automatically starts tracking the angle. The device beeps at absolute 0° and
90°.
Advance device Applications
Sloped Objects
This function is used to measure the angle and length of a sloped object.
The device automatically calculates, distance bewtween both points along with:
 Horizontal distance between the 2 points
 Vertical height between both points and
 The angle included between both the points
*This application requires tripod.
keys to select for long range mode. Select the
=
& using key.
keys to select Inclination Tracking. Select the
 For measuring the length of a sloped object, press the Function key
once.
 Move to the second page of application screen using
 On this screen, Sloped object measurement application
located at the middle left of the display.
 Navigate to the icon using
application. Select the
 To measure the slope, measure points a. & b. from the same
reference point.
 How to measure a. & b.
a. Aim the laser with the
slope and press the
b. Same way aim the laser at the lower target of the slope and
measure that point.
is located at the bottom left of the display.
keys to select for Sloped object
=
icon using key.
key to the top or the upper point of the
key again to record that measurement.
once.
keys.
icon is
icon
icon