TMC Aquarium REEF-Skim PRO 500 Instructions For Installation And Use Manual page 6

FULL SKIMMER ASSEMBLY/RE-ASSEMBLY
REEF-Skim PRO 300
The REEF-Skim PRO 300 comes almost fully assembled. For initial set up or re-assembly after
maintenance/cleaning follow photos below.
1. Make sure the bubble stop sponge is attached to the outlet before use and regularly clean or
replace it to ensure optimum performance. Failure to do so will result in operating problems
and/or leaks.
2. Please follow the included pump instructions for maintenance advice.
1
2
3
4
3
5
6
7
8
9