Mercedes-Benz CLA 2020 Operator's Manual page 352

350 MBUX multimedia system
Accepting/rejecting the data protection reg‐
ulations
For the initial start of the application: a message
with the data protection provisions appears.
Select Accept & Start.
#
Exiting Android Auto
Press the ò button.
#
% Android Auto starts automatically when the
mobile phone is connected with the system
using a cable. If Android Auto was not dis‐
played in the foreground before disconnect‐
ing, the application starts in the background
when reconnected. You can call up Android
Auto in the main menu.
Calling up the Android Auto sound settings
Multimedia system:
© Mercedes me & Apps
4 5
Smartphone Android Auto
5 5
Select sound settings.
#
Setting control of the application buttons
(Android Auto)
Multimedia system:
© Mercedes me & Apps
4 5
Smartphone
5 5
General
5
To switch on Control via Application
#
activate the display button.
To switch off Control via Application
#
deactivate the display button.
Ending Android Auto
To end the connection of Android Auto
#
(with cable): disconnect the connection via
the connecting cable between the mobile
phone and multimedia system.
%
Mercedes-Benz recommends disconnecting
the connecting cable only when the vehicle
is stationary.
Z
5
Transferred vehicle data with Android Auto
and Apple CarPlay
Overview of transferred vehicle data
When using Android Auto or Apple CarPlay
Android Auto Z
5
tain vehicle data is transferred to the mobile
phone. This enables you to get the best out of
selected mobile phone services. Vehicle data is
Buttons:
not directly accessible.
The following system information is transmitted:
Buttons:
Software release of the multimedia system
R
System ID (anonymized)
R
The transfer of this data is used to optimize com‐
munication between the vehicle and the mobile
phone.
To do this, and to assign several vehicles to the
mobile phone, a vehicle identifier is randomly
generated.
This has no connection to the vehicle identifica‐
tion number (VIN) and is deleted when the multi‐
media system is reset (
The following driving status data is transmitted:
Transmission position engaged
R
®
® , cer‐
page 290).
/