Cup Holder - Mercedes-Benz CLA 2020 Operator's Manual

106 Seats and stowing
Secure the roof rack to the anchorage points
#
under covers 1.
Comply with the roof rack manufacturer's
#
installation instructions.
Secure the load on the roof rack.
#

Cup holder

Installing the cup holder in or removing it
from the center console (automatic trans‐
mission)
& WARNING ‑ Risk of accident or injury
when using the cup holder while the
vehicle is moving
The cup holder cannot secure containers
while the vehicle is moving.
If you use a cup holder while the vehicle is
moving, the container may be flung around
and liquids may be spilled. The vehicle occu‐
pants may come into contact with the liquid
and if it is hot, they could be scalded. You
could be distracted from traffic conditions
and you may lose control of the vehicle.
Only use the cup holder when the vehi‐
#
cle is stationary.
Only use the cup holder for containers
#
of the right size.
Close the container, particularly if the
#
liquid is hot.
Cup holder in the stowage compartment without
cover
To remove: slide snap-in brackets
#
cup holder inwards until they are unlocked.
Move the cup holder upwards out of the
#
stowage compartment.
%
The cup holder and the rubber mat beneath
it can be removed for cleaning, e.g. with
clean, lukewarm water.
1 of the