Mercedes-Benz CLA 2020 Operator's Manual page 117

High beam
To switch on: turn the light switch to the
#
L or à position.
Push the combination switch in the direction
#
of arrow 1.
When the high beam is activated, the L
low beam indicator lamp will be deactivated
and replaced by the K high beam indica‐
tor lamp.
To switch off: push the combination switch
#
in the direction of arrow 1 or pull it in the
direction of arrow 3.
High-beam flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signal light
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal light will flash
three times.
To indicate permanently: push the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow 2 or 4.
Vehicles with Active Lane Change Assist:
Indicator operation activated by the driver
R
can extend for the duration of the lane
change.
If the driver indicated directly beforehand
R
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
Light and visibility 115
Activating/deactivating the hazard warning
lamps
Press button 1 .
#
The hazard warning lamps will switch on auto‐
matically if:
the airbag has been deployed.
R