Positioning The Logs - Quadra-Fire HUDBAY-FS Installation Manual

Rear brick retainers
NOTE: For the Hudson Bay Free Standing the
Figure 8.17 -
upper rear brick retainer is used.
Reinstall the pilot shield with the screws removed in Figure
8.6. The pilot shield must be in place before operation of
appliance.
G. Positioning the Logs
While still breakable, the logs do not become fragile until
after the appliance is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.
PLEASE NOTE: Logs have been designed to work
specifically with the burner of this appliance. Exact
placement will ensure proper operation of your gas
appliance and reduce sooting.
#3
#6
Log Set
Figure 8.18 -
32
#4
#5
Quadra-Fire • Hudson Bay Installation Manual_R26 • 01/20
#3
#6
#1
Logs shown installed in firebox. Logs #1 and #2
Figure 8.19 -
are part of the burner pan and are numbered for reference
only.
Install the left rear log (#3) over the locator pins
Figure 8.20 -
in the burner pan.
Install the right rear log (#4) over the locator
Figure 8.21 -
pins in the burner pan.
#4
#5
#2
3-90-7003999