Sanyo FXC-503LD Operating Instructions Manual page 7

Quick Tuning of ATP Stations
Select the desired band.
. Press button @ if the "AS indicator does not appear
in
the display.
Press preset button @ to select the desired ATP preset. If a total of
six stations cannot be pres%t"- - -" will be displayed for the empty
channels.
TO scan programmed stations . . . See "PRESET-SCAN-BUTTON OPERATION".
Notes
/f no station can be received,
"- - -" will appear in the display. The system will tune
into the station which was being received before the ATP function was selected.
[f there are less than 6 stations which can be received, the system will memorize these
stations and start receiving the one memorized tkst.
PRESET-SCAN-BUTTON OPERATION . . . . . . .
5
This function scans each of the preset stations stored in the selected band (both manual presets and auto travel
presets).
To scan . . . . . Select the desired band or ATP mode. Press button @for FM1, FM2, MW or LW band, or
press button @ for less than 0.5 seconds for ATP mode.
Press button o. The system will sequentially receive each preset station for 5 seconds.
To hold the station, press button@ again during this five second period.
SWITCHING BETWEEN LOCAL STATIONS
AND DISTANT STATIONS (DX) . . . . . . . . . ... . . . . . . . . . . . . . .
6
Each time button @is pressed (for less than 0.5 seconds), the search stop sensitivity will be switched between
local and distant stations.
. To receive local stations (strong signals)
. . . . . . . . . . . . . . . . press the button to turnoff "DX"in the display.
Distarit stations (weak signals) . . . . . . . . . . . . . . . . . . . . . . . . . press the button to turn on "DX inthe display.
CD OPERATION *
(FXC-503LD ONLY)
FXC-?503LD WORKS IN CONJUNCTION WITH SANYO CD CHANGER (FXD-CIOO/FXD-
C200) OR OTHER COMPATIBLE SANYO CD CHANGERS.
1
54 '
67832 9
SELECTING
CD MODE
Press button O to switch from radio or tape mode to CD mode.
PUTTING THE CD IN PAUSE MODE . . . . . . . . . .
1
While
p laying a CD press button @ ; the player is in pause mode.
To resume playing, press button @ again.
-6-