Sanyo FXC-503LD Operating Instructions Manual page 12

INSTALLATION
.uD,oup
MOUNTING BRACKET
(HALF SLEEVE)
1.
2.
3.
4.
Insert the mounting bracket into the DIN-standard cutout (182 x 53 mm) in the dashboard or console,
Bend the mounting bracket stopper outwards until the bracket fits snugly in the cutout.
Install the supplied mounting screw (M5) in the audio unit.
Cover the mounting screw with the supplied rubber cap.
Push the unit into mounting bracket until it locks in place.
UNIT REMOVAL
FRONT PANEL
TOOLS
1. Remove the front panel.
2. lnserl the pair of removing tcmls into the holes provided on each side of the audio unit.
3. Remove the audio unit.
-11-