Sanyo FXC-503LD Operating Instructions Manual page 13

ELECTRICAL CONNECTIONS
WIRING
N
Antenna socket
-
/
Antenna
Plug
(r
1
-- 4–Speaker System --- - ~2–Speaker System ---,
I;;
', I
~hfie) @ @al :;:;/;" ,: —
L
'Ii ~
(White) ~@
Left I
Speaker J
, (White/Black) 63 f3
' , (White/Black) @
-@ @q :;:QM ; :
(Gray) @@
Right ~
Speaker ,
I (Gray/Bleck) e 0
, I (Gray/Black) e
(Green) @ ~~~~~ : ~
(Green) @
' (Green/Black) e 0
:: (Green/Black) e e
~"'et) E m:y:l$ht ;; —"
(Motet) @
~.fVioleUBlack) e e
,(Violet/Black) Elf3
1
---- ---- ---- ---— , -,
- +12V Constant powe; ;u~~l~
tiixiO-wj -- -- -
[
-
+12V Accessory/Switched (Red)
Ground wire (Black)
*
~ Power Antenna/Amplifier Turn On (Blue/Reef)
Caution
. DO NOT connect any speaker wires to the metal body or chassis of tha vehicle.
DO NOT connect the speaker common (-) wires to each other.
* Connect each speaker wire directiy to aach speaker terminai.
- Ali speaker common (-) wires must remain floating.
Antenna socket
insert the antenna pfug instafied in your vehicle into this socket.
+12V Constant Power Supply (Yeflow)
Connect this wire to the +12V power terminai which receives power continuously. ~
+12V Accessory/Switched (Red)
Connect this wire to the terminal which receives power while the ignition switch isON orinthe ACCESSO-
RY @sition.
In the case of a vehicle not having ACC, connect this wire to a +1 2V power terminal which receives power
continuously. (Same as terminal 2.)
Ground wire (Black)
Connect this wire to the vehicfe chassis.
Power Antenna/Amplifier Turn On (Blue/Red)
Connect this wire to the controi terminal of a Power Antenna or an extemai amplifier.
When not using a Power Antenna or an exfemai amplifier, this wire is not connected.
-12-