Sanyo FXC-503LD Operating Instructions Manual page 6

RADIO OPERATION
1
2 56
SELECTING RADIO NIODE
'ress button @ The mode will switch from CD* or tape to the radio mode.
'ress button @ to select the desired band.'
*FXC-503LD only
~
FM1 — FM2 —
MW —
LW
1
FIADIO TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Manual tuning . . . . . .
To sefect higher hquency stations, press the @ button (for less than 0.5 seconds).
To select lower frequency stations, press thee button.
To quickly scan up or down in frequency, press and hold tha @ or e button. Release
and press again the button when the desired frequency appears on the display.
A flashing decimal point in the frequency display indicates that the system is receiving
a station 50 kf-lz higher than the dispfayed frequency.
Automatic tuning . . . Press the @or@ button for more than 0.5 seconds.
When the button is released, the system will start automatic tuning and stop at the next
receivable station.
STORING PRESET STATIONS . . . . . . . . . . . . . . .
3
rhe preset buttons can be used to store 6 stations in each band
(FM1, FM2, MW and LW) for quick tuning.
El
I Programming stations . 1 Select the desired band and tune in the station you want to store in memory.
2 Press and hold one of the preset buttons for more than 1.5 seconds.
Repeat steps and to program further stations.
10uick tuning . . . . . . . . . . . Select the desired band and press
one
of the six preset buttons.
ATP (AUTO TRAVEL PRESET)
BUTTON OPERATION . . . . . . . . . . . . . . . . . . . . . .
3,4
$/ith this function, the system searches for and memorizes
the 6 strongest stations in one of the three bands
~FMl, FM2, MW) in order of signal strength.
rhis feature is useful when you are driving in an unfamiliar location and want to memorize Iocaf stations without
:hanging the standard preset stations.
4 total of 12 statism (6 FM and 6 MW) can be programmed.
, To set the stations . . . . . . . . Select the desired band.
'Press and hold button C@ for more than 1.5 seconds. "AS" will appear
in the display.
When the stations have been memorized, scanning will stop and the
strongest station will be received.
-5-