Advertisement
Directions for use
Directions for data entering
An example
setting the lamp parameters (from 3000W
down to 1755W)
From lamp parameter display menu press
OK to enter the editing mode (the dash
starts to flash: enter mode is ON).
Press the left arrow to decrease the "thou-
sands" field down to the desired value
Confirm by pressing enter. The flashing
dash moves to right.
To increase the value currently active
press the right arrow
When pressing enter, the flashing dash
will immediately move to the next field to
be modified.
When the last field (the unit one) has been
entered, press enter to confirm the value.
The asterisk is off: the editing mode is
over.
MAN01554E/1
25
Advertisement
