Advertisement
Connection and operating information
Mounting the synoptic panel
The unit is fitted with a synoptic panel, vertically mounted onto the front panel (pict.
no. 1).
Directions for horizontal mounting:
Please follow the instructions below to place the synoptic panel horizontally (pict. no.
2):
- Take off the synoptic panel on the front panel by releasing the two fixing screws;
- Unscrew the four screws fixing the metal plate that supports the sub-D 15 pin fe-
male connector
- Rotate (90°) the metal plate supporting the sub-D 15 pin female connector
- Screw the four screws again to fix the metal plate
- Place the synoptic panel in its housing and tighten the two screws again.
Pict. no. 1
MAN01554E/1
Pict. no. 2
12
Advertisement
