Advertisement
Directions for use
Directions for data entering
1) Press the keys
mode (program menu).
Afterwards, enter the password to gain access to data entry and modification of the
preset parameters. If the password is incorrect or unknown, quit the menu by en-
tering (as shown in the flowchart) any number. This will allow to go back to display
menu (after the access has been denied).
2) From any position of the program menu twice press the key ESC to go back to
display menu.
3) Parameter setting menu or mode menu: the asterisk (on the right of the parameter)
means you are entering/modifying the setting (at the same time, a flashing dash on
the field to be modified is ON). The absence of this asterisk indicates the value of
the parameter currently active.
4) The lamp turns off when entering "input parameters" and/or "operation" modes.
MAN01554E/1
at the same time to enter the PROGRAM
24
Advertisement
