Functions and controls
Synoptic panel
2) Under PROGRAM mode.
This operating condition is highlighted by the coming on of the following LEDs on the
synoptic panel:
. LINE LED
. PROG LED
Important note: enter the password to modify the operating parameters !
The password is: 125
Detailed instructions for entering the password have to be found in the relevant flow-
charts.
Keys:
to increase/decrease the values to be entered
or to shift to the various fields
to confirm the value/parameter entered
Parameter/operation modes to be entered under program mode are:
1. lamp max. power
2. lamp max. current
3. lamp min. current
4. lamp stand-by current (remote-operated)
5. manual mode (from synoptic panel or remote command)
6. or RS232 operation mode
7. or Ext_10V operation mode
to quit the submenu
MAN01554E/1
22