Advertisement
Connection and operating information
Warnings
Caution: dangerous voltage inside the power supply. Disconnect the unit from
the mains before checking the internal components.
Prevent water, liquids in general and/or foreign objects from getting inside the
appliance (do not open the unit, contact IREM servicing centre !).
Installation must be carried out by trained personnel only.
This power supply must be installed inside a grounded cabinet provided with a
circuit breaker duly rated.
Important note: the fuse holder powering cables are located in the lower part of
the unit (see label on the front panel).
If the plant is provided with a residual current breaker having a tripping value of
30mA, this breaker could trip when switching on the power supply. This does
not normally mean a failure, but is due to the capacitors of the EMI filter. Switch
on the breaker again to alleviate the problem.
Feet mounting
EX-100GM3... electronic power supply is equipped with two fixing brackets that may
be used as an anchoring for the unit (B) or as normal feet when the unit is normally
displaced without any fixing (A).
MAN01554E/1
10
Advertisement
